Removal Procedure
Notice: Make sure the headlamp switch is turned off before beginning
the repair procedure.
- Remove the instrument panel storage compartment. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel and Gauges.
- Press in the switch plunger and pull the switch assembly down from
the retainer.
- Disconnect the electrical connector.
- Remove the bulb from the socket.
Installation Procedure
- Install the bulb into the socket.
- Connect the electrical connector.
- Press in the switch plunger and slide the assembly up into the
retainer.
- Install the instrument panel storage compartment. Refer to
Instrument Panel Compartment Replacement
in Instrument Panel and Gauges.