GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Classic 🢒 Body 🢒 Doors 🢒 Front Side Door Locking System Module Replacement

Removal Procedure
  1. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  2. Remove the front door window. Refer to Front Side Door Window Replacement .

    3. Object Number: 802382 Size: SH
  3. Remove the front door system locking module nuts.
  4. Remove the front door system locking module bolt.
  5. Remove the front door system locking module screw.
  6. Remove the front door lock screws.
  7. Remove the front door system locking module from the front door to gain access to the front door lock.
  8. Disconnect the front door outside handle lock rods from the front door lock.
  9. Disconnect the electrical harness from the front door system locking module and position aside.
  10. Remove the front door system locking module from the door.

Installation Procedure

    Object Number: 802382 Size: SH
  1. Position the front door system locking module to the front door.
  2. Connect the front door outside handle lock rods to the front door lock.
  3. Connect the electrical harness to the front door system locking module.
  4. Position the front door lock to the inside of the front door and align the front door system locking module to the studs on the front door.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the front door system locking module nuts.

    6. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  6. Install the front door system locking module bolt.

    7. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Install the front door system locking module screw.

    8. Tighten
    Tighten the screw to 6 N·m (53 lb in).

  8. Install the front door lock screws.

    9. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  9. Install the front door window. Refer to Front Side Door Window Replacement .
  10. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .