Front Side Repeater Lamp Assembly Europe, Japan

1. Remove the wheelhouse filler panel. Refer to Wheelhouse Filler Replacement in Body Front End.
2. Remove the front side repeater lamp socket from the front side repeater lamp assembly.
3. Remove the lamp assembly retaining nuts.
4. Remove the lamp assembly.

1. Position the front side repeater lamp to the fender.
2. Install the front side repeater lamp retaining nuts.

Tighten
Tighten the front side repeater lamp retaining nuts to 2.3 N·m (20 lb in).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the socket to the lamp assembly.
4. Install the wheelhouse filler panel. Refer to Wheelhouse Filler Replacement in Body Front End.

Front Side Repeater Lamp Bulb Europe, Japan

1. Remove the wheelhouse filler panel. Refer to Wheelhouse Filler Replacement in Body Front End.
2. Remove the front side repeater lamp socket from the front side repeater lamp assembly.
3. Remove the bulb from the socket.

1. Install the bulb to the socket.
2. Install the socket to the lamp assembly.
3. Install the wheelhouse filler panel. Refer to Wheelhouse Filler Replacement in Body Front End.