Tow Hook Replacement Front Export

1. Remove the front fascia. Refer to Front Fascia Replacement in Bumpers and Fascias.
2. Cut through the welds attaching the tow hook to the impact bar.
3. Remove the tow hook.

1. Position the tow hook to the passenger side of the impact bar. The near edge of the tow hood should be 325 mm (13 in) from the side rail.
2. Mig Weld, with 50 mm (2 in) long welds, the hook assembly to the impact bar in 4 places: front, rear, inboard side, and outboard side.
3. Install the front fascia. Refer to Front Fascia Replacement in Bumpers and Fascias.

Tow Hook Replacement Rear Export

1. Remove the rear fascia. Refer to Rear Fascia Replacement in Bumpers and Fascias.
2. Cut through the welds attaching the tow hook to the impact bar.
3. Remove the tow hook.

1. Position the tow hook to the center of the rear impact bar.
2. Mig Weld, with 55 mm (2¼ in) long welds, the hook assembly to the impact bar in 4 places: front, rear, inboard side, and outboard side.
3. Install the rear fascia. Refer to Rear Fascia Replacement in Bumpers and Fascias.