GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 11690  Size: SH
  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 5.7L.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the radiator air baffle lower bolts.
  4. Lower the vehicle.
  5. Disconnect the hood light and air temperature sensor electrical connectors.
  6. Disconnect the radiator air baffle connectors (3).
  7. Remove the radiator air baffle (1).

Installation Procedure


    Object Number: 11690  Size: SH
  1. Install the radiator air baffle (1).
  2. Connect the radiator air baffle connectors (3).
  3. Connect the hood light and air temperature sensor electrical connectors.
  4. Raise the vehicle.
  5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Install the radiator air baffle lower bolts.
  7. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  8. Lower the vehicle.
  9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 5.7L.