GM Service Manual Online
For 1990-2009 cars only

Tools Required

    • J 25033-C Power Steering Pump Pulley Installer
    • J 25034-C Power Steering Pump Pulley Remover

Removal Procedure


    Object Number: 649303  Size: SH
  1. Remove the Brake Pressure Modulator Valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement in Antilock Brake System.
  2. Remove the Brake Pressure Modulator Valve (BPMV) bracket. Refer to Brake Pressure Modulator Valve Bracket Replacement in Antilock Brake System.
  3. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical-5.7L.
  4. Install the J 25034-C on the power steering pump pulley and remove the pulley.

Installation Procedure


    Object Number: 643361  Size: SH
  1. Using J 25033-C install the power steering pump pulley onto the power steering pump.
  2. Important: The pulley must be installed onto pump shaft so that the pulley hub is flush with the pump shaft.

  3. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical-5.7L.
  4. Install the Brake Pressure Modulator Valve (BPMV) bracket. Refer to Brake Pressure Modulator Valve Bracket Replacement in Antilock Brake System.
  5. Install the Brake Pressure Modulator Valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement in Antilock Brake System.