GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Corvette 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Inside Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 82153 Size: SH
  1. Remove the center instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.
  2. Remove the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.
  3. Carefully depress the sensor retaining tabs and remove the inside air temperature sensor from the driver knee bolster trim panel.

Installation Procedure

    Object Number: 82153 Size: SH
  1. Align the inside air temperature sensor to the driver knee bolster trim panel, then push to secure the retaining tabs.

    2. Object Number: 186356 Size: SH

    Important: The inside air temperature sensor must be aligned with and fit into the end of the inside air temperature sensor aspirator duct.

  2. Be sure to ALIGN the inside air temperature sensor with the inside air temperature sensor aspirator duct, while installing the driver knee bolster trim panel.
  3. Install the drivers knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement in Instrument Panel, Gages and Console.
  4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.