Removal Procedure
- Remove the HVAC module. Refer to
HVAC Module Assembly Replacement
.
Important: Rotate the diagnostic test mode (DTM) sensor counterclockwise to disengage the sensor from the lower duct.
- Disconnect the lower RH DTM sensor electrical connector.
- Remove the lower RH DTM sensor from the HVAC module.
Installation Procedure
Important: Rotate the DTM sensor clockwise to engage the sensor to the lower duct.
- Install the lower RH DTM sensor to the HVAC module.
- Connect the lower RH DTM sensor electrical connector.
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement
.