GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Corvette 🢒 Brakes 🢒 Disc Brakes 🢒 Rear Brake Rotor Replacement

Object Number: 1673400 Size: SF

Callout

Component Name

Caution: Refer to Brake Dust Caution in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake caliper. Refer to Rear Brake Caliper Replacement .

1

Retainer

Tip
Once the retainer as been removed, it is not necessary to replace the retainer.

2

Rotor

Tip

    • Disconnect the park brake from the apply lever.
    • After the brake caliper has been removed, relocate the brake caliper to the side and support with mechanics wire or equivalent. DO NOT let the brake caliper hang by the brake hose.
    • If the brake rotor is being removed to service the brake system, mark the relationship of the rotor to the wheel stud.
    • Using the J 42450-A and the J 41013 clean the wheel studs and mounting surface of the brake rotor and wheel hub.