GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 63996 Size: SH
  1. Remove the console. Refer to Console Replacement.
  2. Remove the passenger seat. Refer to Driver or Passenger Seat Replacement.
  3. Lift and disengage the retainer clips on the park brake lever boot.

    4. Object Number: 63998 Size: SH
  4. Lift the park brake lever slightly until it engages the first stop.
  5. Remove the park brake lever assembly mounting bolts.
  6. Disconnect the electrical connector from the park brake switch.
  7. Position the park brake lever assembly to the rear of the vehicle.
  8. Remove the park brake switch.

Installation Procedure

    Object Number: 63998 Size: SH
  1. Install the park brake switch to the park brake lever assembly.
  2. Position the park brake lever assembly to the driveline tunnel.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Connect the electrical connector to the park brake switch.
  4. Install the mounting bolts to the park brake lever assembly.

    5. Tighten
    Tighten the park brake lever assembly mounting bolts to 28 N·m (21 lb ft).


    Object Number: 63996 Size: SH
  5. Position the park brake lever assembly boot to the driveline tunnel.
  6. Install the park brake lever assembly boot nuts.

    7. Tighten
    Tighten the park brake lever assembly boot nuts to 10 N·m (89 lb in).

  7. Install the passenger seat. Refer to Driver or Passenger Seat Replacement.
  8. Install the console. Refer to Console Replacement.
  9. Release the park brake lever.