GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Corvette 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Lever Replacement

Removal Procedure

    Object Number: 63996 Size: SH
  1. Remove the accessory trim plate. Refer to Console Replacement.
  2. Remove the passenger seat. Refer to Driver or Passenger Seat Replacement.
  3. Lift and disengage the retainer clips on the park brake lever boot.

    4. Object Number: 63992 Size: SH
  4. Disconnect the parking brake electrical connector.
  5. Disable the parking brake automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.

    6. Object Number: 63998 Size: SH
  6. Remove the parking brake lever assembly mounting bolts.
  7. Reposition the park brake lever.

    8. Object Number: 404107 Size: SH
  8. Disconnect the front parking brake cable from the drive sector and park brake lever assembly.

Installation Procedure

    Object Number: 404107 Size: SH
  1. Connect the front parking brake cable to the drive sector and park brake lever assembly.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 63998 Size: SH
  2. Install the parking brake lever assembly mounting bolts.

    3. Tighten
    Tighten the parking brake lever assembly mounting bolts to 28 N·m (21 lb ft).


    Object Number: 63992 Size: SH
  3. Connect the parking brake electrical connector.
  4. Enable the parking brake automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.

    5. Object Number: 63996 Size: SH
  5. Install the parking brake lever boot nuts.

    6. Tighten
    Tighten the parking brake lever boot nuts to 10 N·m (89 lb in).

  6. Install the passenger seat. Refer to Driver or Passenger Seat Replacement.
  7. Install the accessory trim plate. Refer to Console Replacement.