GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Equinox 🢒 Steering 🢒 Steering Wheel and Column 🢒 Instrument Panel Retainer Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Disable the SIR system. Refer to SIR Disabling and Enabling.
  3. Remove the window garnish moldings. Refer to Windshield Upper Garnish Molding Replacement.
  4. Remove the upper trim pad. Refer to Instrument Panel Upper Trim Panel Replacement.
  5. Remove the instrument cluster bezel. Refer to Instrument Cluster Replacement.
  6. Remove the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement.
  7. Remove the radio. Refer to Radio Replacement.
  8. Remove the BCM module from the I/P. Refer to Body Control Module Replacement.
  9. Remove the I/P outer trim covers. Refer to Front Floor Console Side Trim Panel Replacement - Right Side and Front Floor Console Side Trim Panel Replacement - Left Side.
  10. Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement.
  11. Remove the steering column filler. Refer to Steering Column Opening Filler Replacement.
  12. Remove the right side I/P trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side.

    13. Object Number: 1344274 Size: SH
  13. Remove the panel which contains the power mirror switch and the dimmer switch.
  14. Remove the inflatable restraint I/P module. Refer to Instrument Panel Inflatable Restraint Module Replacement.
  15. Remove the left and the right carpet retainers. Refer to Front Side Door Opening Floor Carpet Retainer Replacement.

    16. Object Number: 1350099 Size: SH
  16. Remove the screws and the bolts which hold the I/P retainer to the cross beam.

    17. Object Number: 1347080 Size: SH
  17. Remove the I/P retainer from the vehicle.

Installation Procedure

    Object Number: 1347080 Size: SH
  1. Align the I/P retainer to the cross beam.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1350099 Size: SH
  2. Install the screws and the bolts which hold the I/P retainer to the cross beam. Begin at the center and work toward each side.

    3. Tighten the fasteners to 10 N·m (89 lb in).

  3. Install the left and the right carpet retainers. Refer to Front Side Door Opening Floor Carpet Retainer Replacement.
  4. Install the inflatable restraint I/P module. Refer to Instrument Panel Inflatable Restraint Module Replacement.

    5. Object Number: 1344274 Size: SH
  5. Install the panel which contains the power mirror switch and the dimmer switch.
  6. Install the right side I/P trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side.
  7. Install the steering column filler. Refer to Steering Column Opening Filler Replacement.
  8. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement.
  9. Install the I/P outer trim covers. Refer to Front Floor Console Side Trim Panel Replacement - Right Side and Front Floor Console Side Trim Panel Replacement - Left Side.
  10. Install the BCM module from the I/P. Refer to Body Control Module Replacement.
  11. Install the radio. Refer to Radio Replacement.
  12. Install the center trim bezel. Refer to Instrument Panel Accessory Bezel Replacement.
  13. Install the instrument cluster bezel. Refer to Instrument Cluster Replacement.
  14. Install the upper trim pad. Refer to Instrument Panel Upper Trim Panel Replacement.
  15. Install the window garnish moldings. Refer to Windshield Upper Garnish Molding Replacement.
  16. Enable the SIR system. Refer to SIR Disabling and Enabling.

    17. Warning: Refer to Battery Disconnect Warning in the Preface section.

  17. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.