Did you perform the Audible Warning System Check?

--

Go to Step 2

Go to Audible Warnings System Check

1. Disconnect the connector at the multi-function alarm module.
2. Connect an unpowered test lamp between the multi-function alarm module connector, cavity D2 for CKT 39 (PNK), and ground.
3. Place the ignition switch in the RUN position.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the multi-function alarm module. Refer to Multifunction Alarm Module Replacement .

Is the lights-on chime present with the ignition in the RUN position?

--

--

Go to Audible Warnings System Check

Repair the open in CKT 39 (PNK) between splice S216 and the multi-function alarm module.

Is the lights-on chime present with the ignition in the RUN position?

--

--

Go to Audible Warnings System Check