Removal Procedure
- Drain the fuel from the filter assembly. Refer to
Water-in-Fuel Draining.
- Disconnect the fuel lines from the filter assembly.
- Disconnect the electrical connectors.
- Remove the primary fuel from the bracket.
- Remove the primary filter-to-bracket bolts.
- Remove the primary filter assembly.
Installation Procedure
Caution: Refer to Fastener Caution in the Preface section.
- Install the primary filter assembly and tighten to
10 N·m (89 lb in).
- Connect the electrical connectors.
- Connect the fuel lines.
- Prime the fuel system. Refer to
Primary Fuel Filter Replacement.
- Start the vehicle and inspect for leaks.