For 1990-2009 cars only
Removal Procedure
- Remove the air conditioning (A/C) compressor. Refer to Air Conditioning Compressor Replacement.
- If equipped, remove the auxiliary generator. Refer to Auxiliary Generator Replacement.
- Disconnect the fuel feed pipe fitting from the fuel injector pump.
- Disconnect the fuel feed pipe fitting from the left fuel rail.
- Remove the left fuel feed pipe.
Installation Procedure
- Install the left fuel feed pipe.
- Connect the fuel feed pipe fitting to the left fuel rail and tighten to 41 N·m (30 lb ft).
- Connect the fuel feed pipe fittings to the fuel injector pump and tighten to 41 N·m (30 lb ft).
- If equipped, install the auxiliary generator. Refer to Auxiliary Generator Replacement.
- Install the A/C compressor. Refer to Air Conditioning Compressor Replacement.
- Prime the fuel system. Refer to Fuel System Priming.
- Start the engine.
- Inspect the fuel system for leaks.
Caution: Refer to Fastener Caution in the Preface section.
If the engine does not start, repeat the above step.
