Special Tools

1. Remove the engine flywheel. Refer to Engine Flywheel Replacement
2. Install the button of J 44641 into the crankshaft.
3. Press the jaws of J 44641 into the felt portion of the seal far enough to engage the inner lip of the seal.
4. While holding the jaws of J 44641 tightly to the seals inner sleeve, tighten the jaw bolts.
5. Remove the crankshaft rear oil seal using the J 44641 .

1. Place the crankshaft rear oil seal onto the crankshaft.

Note: The J 44642 must be fully secured to the crankshaft to ensure proper seal depth.

2. Install the J 44642 to the crankshaft.
3. Press the crankshaft rear oil seal into position using the J 44642 . The J 44642 will bottom out when the seal reaches the proper depth.
4. Remove the J 44642 .
5. Install the engine flywheel. Refer to Engine Flywheel Replacement.