GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the seat belt escutcheon from the rear corner garnish molding.
  2. Remove the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement.

  3. Object Number: 158332  Size: SH
  4. Remove the seat belt retractor retaining bolts from the seat belt retractor.
  5. Remove the seat belt retractor from the vehicle.

Installation Procedure


    Object Number: 158332  Size: SH
  1. Install the seat belt retractor to the vehicle.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the seat belt retractor retaining bolts to the vehicle.
  4. • Tighten the seat belt retractor upper retaining bolt to 52 N·m (38 lb ft).
    • Tighten the seat belt retractor lower retaining bolt to 10 N·m (89 lb in).
  5. Install the rear corner garnish molding. Refer to Body Rear Corner Garnish Molding Replacement.
  6. Secure the seat belt escutcheon to the rear corner garnish molding.