Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the passenger seat back assembly. Refer to Front Seat Recliner Replacement .
2. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References .

1

Passenger Seat Wiring Harness Assembly

2

Passenger Seat Belt Buckle Assembly

Refer to Front Seat Belt Buckle Replacement.

3

Passenger Seat cushion Cover and Pad

Tip
Remove the seat back cushion cover and pad as an assembly.

4

Inflatable Restraint Front Passenger Presence Sensor Assembly

5

Passenger Seat Recliner Finish Cover Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

6

Passenger Seat Recliner Finish Cover (Qty: 2)

7

Passenger Seat Cushion Frame Rivet (Qty: 2)

8

Inflatable Restraint Front Passenger Presence module Assembly

Tip

9

Passenger Seat Cushion Frame Assembly