Intake Air Pressure and Temperature Sensor Replacement. Chevrolet HHR 2009

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 HHR 🢒 Engine 🢒 Engine Controls and Fuel - 2.0L 🢒 Intake Air Pressure and Temperature Sensor Replacement

Callout	Component Name
Preliminary Procedure Remove the charge air cooler outlet pipe. Refer to Intake Air Pressure and Temperature Sensor Replacement.
1	Sensor Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 9 N·m (80 lb in)
2	Intake Air Pressure and Temperature Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Sensor Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

Intake Air Pressure and Temperature Sensor

Disconnect the electrical connector.