For 1990-2009 cars only
- Raise the front of the vehicle off of the ground. Ensure that the front wheels are free to turn. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the power steering return hose from the power steering pump. Refer to Power Steering Return Hose Replacement .
- Plug the power steering return port on the power steering pump.
- Position the power steering return hose toward a large container in order to contain the draining fluid.
- Perform the following procedure:
- Turn the steering wheel from stop-to-stop.
- Turn the ignition switch to the OFF position.
- Unplug the power steering pump return port.
- Reconnect the power steering return line. Refer to Power Steering Return Hose Replacement .
| 5.1. | Start the engine. |
| 5.2. | Run the engine at idle. |
Notice: Do not hold the steering wheel against the stops while flushing the power steering system. Holding the steering wheel against the wheel stops will cause high system pressure, overheating, and damage to the power steering pump and/or gear.
Ensure that all of the old power steering fluid is cleared from the power steering system.
