Removal Procedure
Tools Required
• | J 42578 Steering
Wheel Puller Legs |
- Disable the SIR system. Refer to
Disabling the SIR System
in SIR
- Position the ignition to the OFF position.
- Remove the Inflatable restraint steering wheel module. Refer
to
Inflatable Restraint Steering Wheel Module Replacement
in SIR
- Scribe an alignment mark on the steering wheel hub. Align the
mark with the slash mark on the steering shaft.
- Loosen the steering wheel nut.
- Position the nut flush with the end of the steering shaft.
- Assemble the J 1859-A
with the J 42578
on the steering wheel.
- Using the J 1859-A
with the J 42578
Remove the steering wheel from the steering shaft.
- Remove the J 1859-A
with the J 42578
from the steering wheel.
- Remove the steering shaft
nut.
- Remove the steering wheel from the steering shaft.
- Unroute the SIR connector from the steering wheel.
- Remove the steering wheel from the vehicle.
Installation Procedure
- Position the steering wheel on the steering column.
- Route the SIR connector
through the steering wheel.
- Align the scribe mark on the steering wheel with the slash mark
on the steering shaft.
- Install the steering wheel.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the steering
shaft nut.
Tighten
Tighten the steering shaft nut to 45 N·m (33 lb ft).
- Install the Inflatable restraint steering wheel module. Refer
to
Inflatable Restraint Steering Wheel Module Replacement
in SIR
- Enable the SIR system. Refer to
Enabling the SIR System
in SIR
- Inspect the operation of the following components:
- | The steering wheel controls. |