GM Service Manual Online
For 1990-2009 cars only

Windshield Wiper Motor Replacement Impala


Object Number: 1634711  Size: SF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .

1

Windshield Wiper Motor Bolts (Qty: 3)

Tighten
8 N·m (71 lb in)

2

Windshield Wiper Motor Crank Arm

Tip

  1. Use the J 39232 or equivalent to separate the transmission arm from the wiper motor crank arm pivot.
  2. Use the J 39529 or equivalent to install the transmission arm onto the wiper motor crank arm pivot.

3

Windshield Wiper Motor

Windshield Wiper Motor Replacement Monte Carlo


Object Number: 1634713  Size: SF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  3. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .

1

Windshield Wiper Motor Bolts (Qty: 3)

Tighten
8 N·m (71 lb in)

2

Windshield Wiper Motor Crank Arm

Tip

  1. Use the J 39232 or equivalent to separate the transmission arm from the wiper motor crank arm pivot.
  2. Use the J 39529 or equivalent to install the transmission arm onto the wiper motor crank arm pivot.

3

Windshield Wiper Motor