Preliminary Procedure

1. Remove the instrument panel (I/P) upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement.
2. Remove the I/P cluster assembly. Refer to Instrument Cluster Replacement.
3. Remove the headlamp switch assembly. Refer to Headlamp Switch Replacement.
4. Remove the right and left insulator panels. Refer to Instrument Panel Insulator Panel Replacement - Right Side and Instrument Panel Insulator Panel Replacement - Left Side.
5. Remove the I/P inflatable restraint. Refer to Inflatable Restraint Instrument Panel Module Replacement.
6. Remove the drivers knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement.
7. Remove the steering column. Refer to Steering Column Replacement.
8. Remove the radio. Refer to Radio Replacement.
9. Remove the HVAC control module. Refer to Heater and Air Conditioning Control Replacement.

1

Instrument Panel Lower Trim Panel Bolt (Qty 6)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (88 lb in)

2

Instrument Panel Lower Trim Panel Screw (Qty 4)

Tighten
2 N·m (18 lb in)

3

Instrument Panel Lower Trim Panel Assembly

Procedure

1. Note routing of the wiring harness prior to removal to aid in the reinstallation.
2. Disconnect all electrical connections to the trim panel.