Preliminary Procedure

1. Remove the rear wheel liner bolts to the rear fascia. Refer to Rear Wheelhouse Panel Liner Replacement.
2. Remove the rear trim sill plate. Refer to Rear Compartment Sill Trim Plate Replacement.
3. Remove the license the lamp. Refer to Rear License Lamp Replacement.

1

Rear Fascia Retainer (Qty: 4)

2

Rear Fascia Retainer (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

3

Rear Fascia Bolt (Qty: 6)

Tighten
10 N·m (89 lb in)

4

Rear Fascia Top Center Nut (Qty: 4)

Tighten
10 N·m (89 lb in)

5

Rear Fascia

Tip
Disconnect the electrical connector.