For 1990-2009 cars only
Removal Procedure
- Remove the transaxle bracket. Refer to Transmission Mount Bracket Replacement .
- Remove the transaxle mount from the transaxle mount frame bracket.
Installation Procedure
- Install the transmission mount to the transmission mount frame bracket.
- Install the nuts.
- Install the transmission bracket on the transmission. Refer to Transmission Mount Bracket Replacement .
Tighten
Tighten the nuts to 53 N·m (39 lb ft).
Refer to
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
in General Information.