Removal Procedure
- Place the drain pan under the vehicle in order to catch any fluid
that may drain.
- Loosen the clamps (4)
on the following components:
• | The power steering pump return port. |
• | The power steering pump return line. |
- Disconnect the rubber section of the power steering return hose (2)
from the power steering return line assembly and the power steering pump return
port.
Installation Procedure
- connect the rubber section
of the power steering return hose (2) to the power steering return
line assembly and the power steering pump return port.
- Tighten the clamps (4) on the following components:
• | The power steering pump return port. |
• | The power steering pump return line. |
- Remove the drain pan from under the vehicle.
- Fill the power steering system. Refer to
Checking and Adding Power Steering Fluid
.
- Bleed the power steering system. Refer to
Power Steering System Bleeding
.
- Inspect the power steering system for leaks. Refer to
Power Steering Gear and Pump Leaks
.