GM Service Manual Online
For 1990-2009 cars only

Problem

Action

A burr on the lock bolt

Inspect the component. Replace the component as necessary.

Refer to Steering Column Jacket - Disassemble - Off Vehicle and Steering Column Jacket - Assemble - Off Vehicle .

A restricted actuator rod

Inspect the rod. Service the rod as necessary.

Refer to Steering Column Jacket - Assemble - Off Vehicle .

Damage to one of the following components:

    • The lock cylinder
    • The steering shaft
    • The rack
    • The park lock cable

Inspect the components. Replace the components as necessary.

Refer to Steering Column Lock Cylinder Set - Disassemble - Off Vehicle or Lock Housing Assembly - Disassemble - Off Vehicle or Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle .

A stuck ignition switch

Inspect the switch. Replace the components as necessary.

Refer to Ignition Switch Assembly - Disassemble - Off Vehicle .

An interference between the bowl and the rack coupling

Inspect the components. Service the components as necessary.

Refer to Steering Column Jacket - Disassemble - Off Vehicle .

A improperly adjusted shift linkage

Inspect the linkage. Service the linkage as necessary.

Refer to Range Selector Lever Cable Adjustment .

A broken or worn lock bolt spring

Inspect the spring. Replace the spring as necessary.

Refer to Steering Column Jacket - Disassemble - Off Vehicle .

An improperly installed steering shaft

Inspect the installation. Service the components as necessary.

Refer to Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle .