Step
| Action
| Value(s)
| Yes
| No
|
1
| Inspect fuse 39 in the fuse block.
Is fuse 39 open?
| --
| Go to
Step
3
| Go to
Step 2
|
2
|
- Turn the ignition switch to the LOCK position.
- Disconnect the seat belt/ ignition key/ lamps alarm electrical
connector.
- Using a test lamp, probe between the seat belt/ ignition key/
lamps alarm harness connector terminal D2 and ground.
Does the test light illuminate?
| --
| Go to
Step
4
| Go to
Step 5
|
3
|
- Replace fuse 39.
- Turn the ignition switch to the RUN position.
- Inspect fuse 39.
Is fuse 39 open?
| --
| Go to
Step
6
| Go to
Step 2
|
4
|
- Inspect the seat belt/ ignition key/ lamps alarm connector terminal D2
for poor terminal contact.
- If the connector is OK, replace the seat belt/ ignition key/
lamps alarm.
Refer to
Multifunction Alarm Module Replacement
Is the repair complete?
| --
| Go to
Step
7
| --
|
5
| Repair a poor connection or an open in CKT 39.
Is the repair complete?
| --
| Go to
Step
7
| --
|
6
| Repair a short to ground in CKT 39.
Is the repair complete?
| --
| Go to
Step
7
| --
|
7
|
- Ensure that the ignition is in the LOCK position.
- Reconnect the connectors and reinstall the components that were
removed.
Is the repair complete?
| --
| Go to
Audible Warnings System Check
| --
|
