Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Turn the ignition switch to the RUN position.
- Observe the instrument cluster gauges and indicators.
Do the ignition cluster gages and the indicators turn on?
| --
| Go to
Step 2
| Go to
Step
3
|
2
|
- Turn the ignition switch to the LOCK position.
- Disconnect the seat belt/ ignition key/ lamps alarm electrical
connector.
- Probe between the seat belt/ ignition key/ lamps alarm electrical
connector terminal D2 and ground.
- Turn the ignition switch to the RUN position while observing the
test light.
Is the test light on?
| --
| Go to
Step
7
| Go to
Step 8
|
3
| Inspect fuse 39 in the fuse block.
Is fuse 39 open?
| --
| Go to
Step
4
| Go to
Step 5
|
4
|
- Replace fuse 39.
- Turn the ignition switch to the RUN position.
- Inspect fuse 39.
Is fuse 39 open again?
| --
| Go to
Step
6
| Go to
Step 9
|
5
|
- Inspect for a poor connection or an open between fuse 39
terminal C1 and the ignition switch CKT 3.
- Repair as needed.
Is the repair complete?
| --
| Go to
Step
9
| --
|
6
| Repair the short to ground in CKT 39.
Is the repair complete?
| --
| Go to
Step
9
| --
|
7
|
- Inspect the seat belt/ ignition key/ lamps alarm connector for
an open or poor contact at terminal D2.
- Replace the seat belt/ ignition key/ lamps alarm as needed. Refer
to
Multifunction Alarm Module Replacement
.
Is the repair complete?
| --
| Go to
Step
9
| --
|
8
| Repair the poor connection or an open in CKT 39.
Is the repair complete?
| --
| Go to
Step
9
| --
|
9
|
- Ensure that the ignition switch is in the LOCK position.
- Reconnect the connectors and reinstall the components that were
removed.
Is the repair complete?
| --
| Go to
Audible Warnings System Check
| --
|
