Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Was the Power Door Locks System Check performed? | -- | Go to Step 2 | Go to Power Door Locks System Check in Doors | ||||||
2 | Was the Rear Compartment Lid Release System Check performed? | -- | Go to Step 3 | Go to Rear Compartment Lid Release System Check in Body Rear End | ||||||
3 | Check the RCDLR for proper power and grounding. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 4 | ||||||
4 | Resynchronize all of the keyless entry transmitters. Refer to Transmitter Synchronization Do the door locks cycle while you resynchronize the keyless entry transmitters? | -- | Go to Step 5 | Go to Step 6 | ||||||
5 | Press the following buttons (one at a time) on the keyless entry transmitter in order to test the keyless entry system:
Do all of the keyless entry system functions operate correctly? | -- | Go to Step 12 | Go to Step 7 | ||||||
6 | Use a DMM in order to measure the voltage on each one of the keyless entry transmitter batteries. Is the voltage within the specified range? | 3-3.5 V | Go to Step 7 | Go to Step 8 | ||||||
7 |
Does the keyless entry system operate correctly? | -- | Go to Step 12 | Go to Step 9 | ||||||
8 |
Do the door locks cycle while you resynchronize the keyless entry transmitter? | -- | Go to Step 7 | Go to Step 9 | ||||||
9 |
Does the keyless entry system work? | -- | Go to Step 10 | Go to Step 11 | ||||||
10 | Replace the faulty keyless entry transmitter(s). Refer to Transmitter Programming Has the repair been made? | -- | Go to Step 12 | -- | ||||||
11 |
Has the repair been made? | -- | Go to Step 12 | -- | ||||||
12 |
Have all repairs been made? | -- | -- |
