GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Regulator Drive Tape Replacement

Removal Procedure
  1. Remove the regulator. Refer to Rear Side Door Window Regulator Replacement .
  2. Remove the tape from the tabs on the regulator.
  3. Run the tape out of the regulator.

Installation Procedure
  1. Cut the service tape to the following specifications:
    2. • 786 mm (31 in) for manual window regulator
    • 874 mm (34½ in) for power window regulator
  2. Install the tape to the regulator.
  3. Install the slots on the tape to the tabs.
  4. Install the regulator. Refer to Rear Side Door Window Regulator Replacement .