GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Regulator Replacement

Rear Side Door Window Regulator Replacement Power

Removal Procedure
  1. Remove the rear side door window. Refer to Rear Side Door Window Replacement .

    2. Object Number: 295280 Size: MH
  2. Remove the door window regulator bolts (1).
  3. Remove the rivets (2) from the rear door window regulator (5).
  4. Disconnect the electrical connector (3), if equipped.
  5. Remove the rear side door regulator.

Installation Procedure

    Object Number: 295280 Size: MH
  1. Install the rear side door regulator (5).
  2. Connect the electrical connector, if equipped.
  3. Install the rivets (2).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the door window regulator bolts (1).

    5. Tighten
    Tighten the door window regulator bolts to 10 N·m (89 lb in).

  5. Install the rear side door window. Refer to Rear Side Door Window Replacement .

Rear Side Door Window Regulator Replacement Manual

Removal Procedure
  1. Remove the rear side door window. Refer to Rear Side Door Window Replacement .

    2. Object Number: 295266 Size: SH
  2. Remove the door window regulator bolts (3).
  3. Remove the rivets (2) from the rear door window regulator (1).
  4. Remove the rear side door regulator.

Installation Procedure

    Object Number: 295266 Size: SH
  1. Install the rear side door regulator (1).
  2. Install the rivets (2).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the regulator bolts (3).

    4. Tighten
    Tighten the door window regulator bolts to 10 N·m (89 lb in).

  4. Install the rear side door window. Refer to Rear Side Door Window Replacement .