GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Lumina 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Armrest Replacement

Removal Procedure
  1. Remove the seat back. Refer to Rear Split Folding Seat Back Replacement .
  2. Remove the folding seat back armrest bracket nuts.
  3. Remove the armrest from the seat.

Installation Procedure
  1. Install the armrest to the seat.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the folding seat back armrest bracket nuts.

    3. Tighten
    Tighten the armrest support bracket nuts 3 N·m (27 lb in).

  3. Install the seat back. Refer to Rear Split Folding Seat Back Replacement .