GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Lumina APV 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T60-E 🢒 Manual Detent Spring and Roller Replacement

Removal Procedure
  1. Remove the case side cover pan.

    2. Object Number: 99165 Size: SH
  2. Remove the manual detent roller bolt.
  3. Remove the manual detent roller.

Installation Procedure

    Object Number: 99165 Size: SH
  1. Install the manual detent roller.
  2. Install the manual detent roller bolt.

    3. Tighten
    Tighten the bolt to 11 N·m (97 lb in).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the case side cover pan. Refer to Control Valve Body Cover Replacement .
  4. Adjust the fluid level.
  5. Inspect for the following:
    6. • Proper completion of repairs
    • Proper fluid level. Refer to Transmission Fluid Check .
    • Fluid leaks. Refer to Fluid Leak Diagnosis and Repair .