Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
|
Important: A short to ground will cause an open fuse(s). Before performing this diagnostic procedure, Inspect the fuse(s) for a open. | ||||||||
1 |
Does the test lamp light? | -- | ||||||
2 | Use a test lamp in order to backprobe the remote control door lock receiver between terminal M and terminal P. Does the test lamp light? | -- | ||||||
3 | Replace the left IP wiring harness junction block. Refer to Relay/Fuse Center Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | System OK | -- | ||||
4 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | System OK | -- | ||||
5 | Repair the open in CKT 1737 between the left IP wiring harness junction block and the remote control door lock receiver. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- | ||||
