GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Malibu 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Fog Lamp Replacement

Removal Procedure

    Object Number: 442617 Size: SH
  1. Remove the headlamp assembly. Refer to Headlamp Replacement .
  2. Disconnect the electrical connector (1) from the fog lamp (2).

    3. Object Number: 442662 Size: SH
  3. Remove the fog lamp mounting screws (1).
  4. Remove the fog lamp (2) from the vehicle.

Installation Procedure

    Object Number: 442617 Size: SH
  1. Position the fog lamp (2) on the vehicle
  2. Connect the electrical connector to the fog lamp (1).

    3. Object Number: 442662 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fog lamp mounting screws (1).

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the headlamp assembly. Refer to Headlamp Replacement .