Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the drive belt. Refer to Drive Belt Replacement for the 3.5L engine or Drive Belt Replacement for the 3.9L engine.
2. Remove the power steering pump pulley. Refer to Power Steering Pump Pulley Replacement .
3. Remove the intake manifold Cover. Refer to Intake Manifold Cover Replacement for the 3.5L engine or Intake Manifold Cover Replacement for the 3.9L engine.

1

Bolt, Power Steering Pump (Qty: 3)

Tip
Use an appropriate tool to remove the power steering fluid from the reservoir before removing the hoses from the pump.

Tighten
25 N·m (18 lb ft)

2

Fitting, Power Steering High Pressure Hose

Tighten
27 N·m (20 lb ft)

3

Clamp, Power Steering Return Hose (at pump)

Tip
Position the clamp rearward to remove the hose from the pump.

4

Pump, Power Steering