GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Engine Mount Bracket Replacement

Removal Procedure

    Object Number: 1998854 Size: SH
  1. Remove the engine mount. Refer to Engine Mount Replacement.
  2. Remove the engine mount bracket to engine bolts (1).
  3. Remove the engine mount bracket (2).

Installation Procedure

    Object Number: 1998854 Size: SH
  1. Position the engine mount bracket (2) to the engine.
  2. Install the engine mount bracket bolts (1) in the following locations:
    3. • The long bolts in the forward and lower front holes
    • The short bolt in the upper rear hole

    Notice: Refer to Fastener Notice in the Preface section.

  3. Tighten the engine mount bracket bolts in the following sequence:
    4. 3.1. Upper Left
    3.2. Lower Left
    3.3. Right

    Tighten
    Tighten the bolts to 100 N·m (74 lb ft).

  4. Install the engine mount. Refer to Engine Mount Replacement.