GM Service Manual Online
For 1990-2009 cars only

Quarter Window Replacement Monte Carlo

Tools Required

    • J 39032 Stationary Glass Removal Tool
    • Urethane Adhesive Kit GM P/N 12346392 or Equivalent
    • Isopropyl Alcohol or Equivalent
    • Cartridge-type Caulking Gun
    • Commercial-type Utility Knife
    • Razor Blade Scraper
    • Suction Cups
    • Plastic Paddle

Removal Procedure


    Object Number: 314153  Size: SH

    Caution: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.

    Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim.

  1. Remove the rear quarter upper trim. Refer to Quarter Upper Trim Panel Replacement in Interior Trim.
  2. Remove the rear quarter lower trim. Refer to Quarter Lower Rear Trim Panel Replacement in Interior Trim.
  3. Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.

    Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle to protect the outer painted surface.

  4. This will allow the urethane adhesive to be separated from the window.
  5. • Leave a base of urethane on the pinch-weld flange.
    • The only suitable lubrication is clear water.
    • Use J 39032 or equivalent in order to remove the window.
    • Remove the quarter modular window from the pinch-weld flange.

Installation Procedure

  1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .
  2. Install the rear quarter lower trim. Refer to Quarter Lower Rear Trim Panel Replacement in Interior Trim.
  3. Install the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement in Interior Trim.
  4. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.

Quarter Window Replacement Impala

Tools Required

    • J 39032 Stationary Glass Removal Tool
    • Urethane Adhesive Kit GM P/N 12346392 or Equivalent
    • Isopropyl Alcohol or Equivalent
    • Cartridge-type Caulking Gun
    • Commercial-type Utility Knife
    • Razor Blade Scraper
    • Suction Cups
    • Plastic Paddle

Removal Procedure


    Object Number: 506224  Size: SH

    Caution: If a window is cracked but still intact, crisscross the window with masking tape in order to reduce the risk of damage or personal injury.

    Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.

  1. Remove the rear quarter upper trim. Refer to Quarter Upper Trim Panel Replacement in Interior Trim.
  2. Remove the rear quarter lower trim. Refer to Quarter Lower Rear Trim Panel Replacement in Interior Trim.
  3. Caution: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.

    Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle to protect the outer painted surface.

  4. This will allow the urethane adhesive to be separated from the window.
  5. • Leave a base of urethane on the pinch-weld flange.
    • The only suitable lubrication is clear water.
    • Use J 39032 or equivalent in order to remove the window.
    • Remove the quarter modular window from the pinch-weld flange.

Installation Procedure

  1. Install a stationary window into the opening. Refer to Adhesive Installation of Stationary Windows .
  2. Install the rear quarter lower trim. Refer to Quarter Lower Rear Trim Panel Replacement in Interior Trim.
  3. Install the rear quarter upper trim panel. Refer to Quarter Upper Trim Panel Replacement in Interior Trim.
  4. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.