GM Service Manual Online
For 1990-2009 cars only

Power Mirror Switch Replacement Impala

Removal Procedure


    Object Number: 561677  Size: SH
  1. Remove the front door pull cup from the front door inner trim panel. Refer to Armrest Pull Cup Replacement .
  2. Disconnect the electrical connectors from the power mirror switch.
  3. Remove the power mirror switch from the front door pull cup, using a small flat-bladed tool at the side of the mirror switch in order to release the mirror control switch retainer.
  4. Remove the power mirror switch from the front door pull cup.

Installation Procedure


    Object Number: 561677  Size: SH
  1. Install the power mirror switch to the front door pull cup pressing into place until fully seated.
  2. Connect the electrical connectors to the power mirror switch.
  3. Install the front door pull cup to the front door trim panel. Refer to Armrest Pull Cup Replacement .

Power Mirror Switch Replacement Monte Carlo

Removal Procedure

  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .

  2. Object Number: 771656  Size: SH
  3. Remove the armrest pull cup. Refer to Armrest Pull Cup Replacement .
  4. Disconnect the power mirror switch by pressing the thumb tab retainers outward and remove the switch from the pull handle.

Installation Procedure

  1. Install the power switch by pressing it into the pull handle.

  2. Object Number: 771656  Size: SH
  3. Install the armrest pull cup. Refer to Armrest Pull Cup Replacement .
  4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .