Sunroof Switch Replacement w/o Overhead Console

1. Grasp the power sunroof switch on the left and right sides.

Important: The switch must be rotated, pulled down on the left side, to be removed.

2. Use 2, small, flat-bladed tools in order to disengage the clips which are located at the front and rear of the power sunroof switch. Hold the flat-bladed tools parallel to the roof and push straight in.
3. Rotate the power sunroof switch toward the left side to disengage it from the mounting bracket and pull down.
4. Disconnect the electrical connector from the power sunroof switch.
5. Remove the power sunroof switch from the vehicle.

1. Connect the electrical connector to the power sunroof switch.
2. Rotate the power sunroof switch back into the vehicle.
3. Firmly push the power sunroof switch into the headliner until fully seated.

Sunroof Switch Replacement With Overhead Console

Important: The driver information center control module, and the power sunroof switch is serviced as a complete part.

1. Remove the overhead console. Refer to Roof Console Replacement in Interior Trim.
2. Remove the driver information center control module, contaning the power sunroof switch from the overhead console.

1. Install the driver information center control module, contaning the power sunroof switch to the overhead console.
2. Install the overhead console. Refer to Roof Console Replacement in Interior Trim.