GM Service Manual Online
For 1990-2009 cars only

Front Seat Heater Switch Replacement Impala

Removal Procedure

  1. Remove the front seat cushion outer trim panel. Refer to Front Seat Trim Panel Replacement .

  2. Object Number: 569056  Size: SH
  3. Disconnect the electrical connector from the front seat wiring harness.

  4. Object Number: 569067  Size: SH
  5. Remove the front seat heated seat switch, using a small, flat-bladed tool to release the retainer clips.

  6. Object Number: 569059  Size: SH
  7. Remove the front seat heated seat switch from the front seat cushion outer trim panel.

Installation Procedure


    Object Number: 569059  Size: SH
  1. Install the front seat heated seat switch to the front seat cushion outer trim panel, pressing into place until fully seated.

  2. Object Number: 569056  Size: SH
  3. Connect the electrical connector to the front seat wiring harness.
  4. Install the front seat cushion outer trim panel. Refer to Front Seat Trim Panel Replacement .

Front Seat Heater Switch Replacement Monte Carlo

Removal Procedure


    Object Number: 601908  Size: SH
  1. Remove the front floor console trim plate. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connector from the front floor console wiring harness.
  3. Remove the front seat heated seat switch, using a small, flat-bladed tool to release the retainer clips.
  4. Remove the front seat heated seat switch from the front floor console trim plate.

Installation Procedure


    Object Number: 601908  Size: SH
  1. Install the front seat heated seat switch to the front floor console trim plate, pressing into place until fully seated.
  2. Connect the electrical connector to the front floor console wiring harness.
  3. Install the front floor console trim plate. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.