Removal Procedure
- Remove the overhead console. Refer to
Roof Console Replacement
.
- Remove the sunshade anchors. Refer to
Sunshade Anchor Replacement
.
- Lower the headliner at the sunroof opening.
- Remove the foam tape from the electrical harness on the console retainer
(2).
- Reposition the electrical harness away from the retainer.
- Slide the retainer forward and remove the retainer from the front of
the headliner.
- Remove the remote compass sensor.
Installation Procedure
- Install the remote compass sensor in the
console retainer.
- Slide the retainer (2) under the front edge of the headliner
to the installed position.
- Position the electrical harness in the retainer and tape the harness
into place.
- Install the sunshade anchors. Refer to
Sunshade Anchor Replacement
.
- Install the overhead console. Refer to
Roof Console Replacement
.