GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 460257  Size: SH
  1. Remove the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  2. Remove the rear compartment lid struts. Refer to Rear Compartment Lid Strut Replacement .
  3. Use a grease pencil in order to mark the quarter panel hinge to the quarter panel.
  4. Remove the bolts from the rear compartment hinge.
  5. Remove the rear compartment hinge from the quarter panel.

Installation Procedure


    Object Number: 460257  Size: SH
  1. Align the rear compartment hinge to the quarter panel.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the rear compartment hinge to rear quarter bolts.
  4. Tighten
    Tighten the rear compartment hinge to rear quarter bolts to 25 N·m (18 lb ft).

  5. Install the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  6. Install the rear compartment lid struts. Refer to Rear Compartment Lid Strut Replacement .

  7. Object Number: 460244  Size: SH
  8. Adjust the rear compartment lid hinge as required.