Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the rod clamp. Refer to
Shift Linkage Adjustment
.
- Remove the console.
- Remove the gearshift lever housing bolts and the gearshift lever housing.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the gearshift lever housing and the gearshift lever housing bolts.
Tighten
Tighten the gearshift housing bolts to 7 N·m
(62 lb in).
- Adjust the shift linkage.
- Install the console.
- Connect the negative battery cable.