Removal Procedure
- Remove the center console trim bezel. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gauges
and Console.
- Remove the 2 screws and
pull the HVAC control unit forward.
- Remove the 2 screws and the fresh/recirc switch.
- Disconnect the blower speed selector switch electrical connector.
- Disconnect the A/C switch electrical connector.
- Remove the following from the HVAC control unit:
• | The temperature control cable |
- Remove the HVAC control unit.
Installation Procedure
- Install the following to the HVAC control unit:
• | The temperature control cable |
- Connect the blower speed selector switch electrical connector.
- Connect the A/C switch electrical connector.
- Install the fresh/recirc
switch. Secure with the 2 screws.
- Install the HVAC control unit to the instrument panel. Secure
with the 2 screws.
- Install the center console trim bezel. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gauges
and Console.
- Adjust the cables as necessary, refer to the following: