Removal Procedure
- Remove the instrument
panel ashtray from the instrument panel ashtray housing by depressing the
spring loaded tab and pulling rearward.
- Using a taped flat bladed tool, gently pry and release the 6 retaining
clips which secure the IP accessory center trim plate (1) to the instrument
panel assembly.
- Disconnect the following components:
• | The 2 cigar lighter electrical connectors |
• | The instrument panel ashtray bulb socket |
- Remove the cigar lighter assembly, if necessary. Refer to
Cigar Lighter Housing Replacement
.
- Remove the instrument panel ashtray housing, if necessary.
Installation Procedure
- Install the instrument
panel ashtray housing, if removed.
- Install the cigar lighter assembly, if removed. Refer to
Cigar Lighter Housing Replacement
.
- Connect the following components:
• | The 2 cigar lighter electrical connectors |
• | The IP ashtray bulb socket |
- Install the IP accessory center trim plate (1) to the IP
assembly. Ensure that the retaining clips are fully engaged.
- Install the instrument panel ashtray to the instrument panel ashtray
housing by depressing the spring loaded tab.