Removal Procedure
- Remove the center console trim bezel. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gages and Console.
- Remove the 2 screws and pull the HVAC control unit forward.
- Disconnect the defogger and air inlet switch electrical connector.
- Remove the 2 screws and the defogger and air inlet switch from the HVAC control unit.
Installation Procedure
- Install the defogger and air inlet switch to the HVAC control unit. Secure with the 2 screws.
- Connect the defogger and air inlet switch electrical connector.
- Install the HVAC control unit to the instrument panel. Secure with the 2 screws.
- Install the center console trim bezel. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gages and Console.