Removal Procedure
- Remove the IP accessory
center trim plate. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument
Panel, Gauges and Console.
- Remove the 4 screws (2) which secure the radio (1).
- Pull the radio (2) from
the instrument panel.
- Disconnect the following from the radio:
• | The electrical connector |
Installation Procedure
- Connect the radio electrical
connector.
- Connect the antenna lead (1) to the radio (2).
- Install the radio (1)
to the instrument panel. Secure the radio with the 4 screws (2).
- Install the IP accessory center trim plate. Refer to
Instrument Panel Center Trim Panel Replacement
in Instrument Panel, Gauges and Console.