GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Prizm 🢒 Body and Accessories 🢒 Doors 🢒 Door Lock Cylinder Replacement

Removal Procedure

    Object Number: 626815 Size: SH
  1. Remove the front side door outside handle. Refer to Front Side Door Outside Handle Replacement .
  2. Remove the following components from the outside door handle (1):
    3. • The bolt (2)
    • The door lock cylinder (3)

Installation Procedure

    Object Number: 626815 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the door lock cylinder (3) to the outside door handle (1). Secure the lock cylinder with the bolt (2).

    2. Tighten
    Tighten the door lock cylinder bolt to 5.5 N·m (49 lb in).

  2. Install the front side door outside handle. Refer to Front Side Door Outside Handle Replacement .